IPP410ecoPlus Peltier Cooled Laboratory Incubator With Dual Display, 384L, 115V

IPP410ecoPlus Peltier Cooled Laboratory Incubator With Dual Display, 384L, 115V

(No reviews yet) (No reviews yet)
418.00 LBS
Calculated at Checkout

The Memmert IPP410eco Peltier cooled laboratory incubator is quiet, space-saving, environmentally friendly, and extremely economical for use in microbiology, zoology, food, cosmetics or the pharmaceutical industry.

A Peltier system performs both heating and cooling and eliminates the need for a separate cooling compressor. This prolongs the functional lifespan of the incubator while delivering energy savings and more precise temperature control. 

The TFT display controls are easy to use and Function Setpoint WAIT feature does not begin the countdown timer until the desired temperature has been reached.

The Memmert IPP30Plus features twin displays for wider range of controls including the ability to modify the heating and cooling performance distribution by individual control of the Peltier elements in the upper and lower row.

The programming interface can be set in English, German, Spanish, French, Czech and Hungarian to accommodate a wide range of lab personnel. 

Automatically restores to last program in event of power failure

The AtmosControl software allow for remote programming that can be done via mouse/PC or tablet, and data can be transferred using USB stick and Ethernet/LAN. 

Inner glass door and fully insulated stainless steel door with 2-point locking mechanism

Integrated over and undertemperature protection "ASF", automatically following the set-point value at a preset tolerance range, visual and audio alarm in case of over or undertemperature.

Over- and undertemperature monitor TWW, protection class 3.3 or adjustable temperature limiter TWB protection class 2 selection on display.

Comes with two stainless steel electropolished shelves, fourteen total shelf capacity.

Operating conditions and set up: 

The distance between the wall and the rear of the appliance must be at least 15 cm. The clearance from the ceiling must not be less than 20 cm and the side clearance from walls or nearby appliances must not be less than 5 cm.

Ambient temperature: 16 ºC to 40 ºC

Humidity rh max: 70 %, non-condensing

Altitude of installation max: 2,000 m above sea level

Temperature Range:
0°C to +70°C
Temperature Accuracy:
Working Temperature Range:
With light: 10°C to 40°C; without light: 0 (at least 20 below ambient temperature) to +70°C
Three freely selectable temperature values, 2-point calibration for humidity: 20 and 90 % rh
Ethernet LAN, USB
Interior Dimensions (W x H x D):
25.19” x 47.24” x 19.68” (less 32mm for the fan)
Exterior Dimensions (W x H x D):
32.44” x 67.717” x 25.78” (+56mm door handle)
2 Included
Maximum Loading Weight: