Labnet ENDURO E1020-20 20.20 Horizontal DNA Gel Box

Labnet ENDURO E1020-20 20.20 Horizontal DNA Gel Box

(No reviews yet) (No reviews yet)
SKU:
LI-EE-2020
Weight:
15.00 LBS
Shipping:
Calculated at Checkout
$722.00 $659.00
(You save $63.00 )
Share:

The high capacity Labnet ENDURO 20.20 is primarily designed for resolution of high numbers of samples such as from cloning or PCR.

The ENDURO 20.20 allows ultra-high resolution separations over extended runs and is ideal for large-scale preparatory and analytical electrophoresis techniques.

Multichannel pipette compatible combs up to 40 samples facilitate speed loading of up to 440 samples per gel. 50 sample combs allow maximum sample capacity of 550 samples per gel.

Casting dams allow gels to be rapidly cast externally while the ENDURO 20.20 unit is in use.

Why choose Labnet ENDURO Horizontal DNA Gel Boxes?

ENDURO™ gel tanks are molded for leak-proof performance and a long service life. The corrosion resistant platinum electrodes are located in cassettes to protect them during cleaning and provide for easy replacement. The lids fit on the gel boxes in only one direction. A drip ring on the lid recycles condensed buffer and prevents it from dripping directly onto the gel.

Casting gels for the ENDURO™ system is very easy. Simply snap the rubber gates onto the ends if the tray, place the comb in position and pour the gel - no taping is necessary. Slots on the sides of the gel trays hold the combs in place. The two piece combs are designed so that the teeth can be raised or lowered to vary the depth of the well within the gel. The supplied combs are 1.5 mm thick. Combs of other thicknesses are available separately. After the gel has hardened, the combs and gates are removed and the gel and tray placed in the gel box. Loading strips may be placed on the bottom of the gel box to aid in well visualization. Gel trays are UV transparent.

The power leads for the ENDURO™ system are attached to the gel box lid. The connection with the electrodes is made only when the lid is properly in place. Removal of the lid removes power from the system. Side tabs and pressure pads make lid removal easy and prevent sloshing of buffer.

Dimensions of unit:
23 x 39.5 x 9 cm
Gel size:
20 x 20 cm
Gel buffer volume:
1.200 mL
Max number of samples:
450 samples
Comes equipped with these combs:
2 each, 40 tooth; 2 each, 20 tooth